Fournisseurs de haute qualité Outils de forage au diamant, Foret Diamant, Mèche à diamant en Chine

Accueil > Liste de Produits > Outils de forage au diamant > Perçages de diamant frittés frittés de haute qualité pour pierre

Perçages de diamant frittés frittés de haute qualité pour pierre

Informations de base

Modèle:  SY-CDB-01(Core Drill)

Description du produit

Modèle NO: SY-CDB-01 (foret de base) Alésage: 1/2 "Type de gaz: complété / segmenté Caractéristiques: Haute tension et efficacité Nom: Core Drill Bits Nom du produit: Diamond Core Drill Transport Package: Package original pour forage de base Bits Origine: Quanzhou Chine Diamètre (mm): 18-400mm Longueur (mm): 60-500 Avantage: Caractéristique de haute qualité: Longue durée de vie Support: OEM et ODM Marque: SUNNY Spécifications: Grade A Core Drill Code HS: 8207501000 High Quality Sintered Diamond Core Drill Bits for Stone
Perçages de diamant frittés frittés de haute qualité pour pierre
Foret de base de construction
Des forets de forage sont réalisés pour percer des trous d'alésage dimensionnellement précis dans ces matériaux, le béton armé, l'asphalte, la maçonnerie, la pierre naturelle et artificielle. Largement utilisé dans les industries du bâtiment, du chauffage, de l'hygiène et de l'électricité.
Caractéristiques:
1. concentration élevée en diamant, taux de forage rapide, coupe facile et longue durée de vie.
2. Les segments de diamant pré-affûtés offrent une facilité d'utilisation immédiate.

High Quality Sintered Diamond Core Drill Bits for Stone
BASIC INFO
 Brand  SUNNY
 Product Name High Quality Sintered Diamond Core Drill Bits for Stone
 Item No. SY-DCD-313
 Diameter

 
25mm-598mm
 Material  Diamond
 Origin  Quanzhou, Fujian, China
 Features
1: high diamond concentration,fast drilling rate,easy cutting and long service life.
2: Pre-sharpened diamond segments provide immediate usability.

 
 Application  Used for reinforced concrete, asphalt,masonry,natural and artificial stone.
High Quality Sintered Diamond Core Drill Bits for Stone
Diameter(mm) Effective length(mm) Connection Segment shape
φ25~φ598      L350-L600 1.1/4"UNC
R 1/2"
spire
turbo
normal
High Quality Sintered Diamond Core Drill Bits for StoneHigh Quality Sintered Diamond Core Drill Bits for StoneHigh Quality Sintered Diamond Core Drill Bits for Stone
Foret Diamond Core - FAQ et dépannage
SUNNY a préparé ce guide pour vous aider à trouver, identifier et résoudre les problèmes que vous pourriez rencontrer avec des forets diamantés.
La majorité des problèmes rencontrés proviennent de:
L'utilisation d'un foret non adapté au travail, l'utilisation incorrecte d'un foret, des défauts d'équipement. L'outil ne coupe pas
Symptom Cause Remedy

The tool will not cut.

The material is too hard for the diamond specification. Match the diamond specification to the material.
The bit is glazed (smooth diamonds). Re-sharpen the tool by drilling into abrasive material (sandstone, block etc.)
Excessive speed of rotation. Adjust speed of rotation.
The cooling is excessive and causes the tool to aquaplane. Reduce the water flow.
Excessive play within the carriage guides. Adjust the carriage on the slide to reduce play.
The weight on the tool is insufficient. Increase the weight on the tool.
The machine is badly fixed. Check that the machine's fixing is correct.
The motor is too weak. Match the motor power to the diameter.
Usure excessive des segments de diamant.
symptom cause remedy

Excessive wear of diamond segments.

Insufficient irrigation. Adjust the water flow.
Insufficient speed of rotation. Adjust speed of rotation.
Excessive speed of advance. Reduce speed of advance.
The material is more abrasive than expected. Use a blade with a harder diamond specification (see drill-bit selection table).
Too much motor power applied to the tool. Match the motor power to the drill diameter.
Too much play on the machine causing vibrations. Check the state of the machine.
Usure excessive du tube en acier du bit.
Symptom Cause Remedy

Excessive wear of the bit's steel tube.

The machine is badly anchored. Anchor the machine firmly.
The machine is incorrectly adjusted (excessive play in the carriage guides, motor spindle or adapter out of true, etc.). Correctly adjust the machine, replace worn parts, correct the play (rollers, bearings, adapters, etc.).
The tool is warped. Withdraw any warped tool. If it is relatively new, it may be straightened by the supplier.
The bit is not correctly fixed to the motor spindle. Check that the bit is correctly aligned on the motor spindle (straight line).
There are fragments of metal in the bottom of the hole that have not been evacuated by the coolant. Remove all the metal fragments from the drilled hole. Temporarily increase the flow of water to clean out the hole and remove any debris that may still be there.
Segments brisés et perdus dans le trou.
symptom cause remedy

Segments broken and lost in the hole.

For a bit with brazed segments, stopping the coolant even for an instant has caused the segments to heat up and destroy the brazing. Always ensure the tool is correctly irrigated.
The bit has suffered some knocks in the hole (due to steel or loose debris, etc.) and these have broken the segments. Remove the bit from the machine and recover all the bits of steel, segments and debris before introducing a new bit. If any segment debris remains in the hole, there is a risk of very rapid damage to the new bit.
Excessive speed of rotation causes heating up of the segments. Take the tool out of service, replace or repair it if possible (consult supplier). Adjust the speed of rotation.
Start up too brutal. Always start drilling gently.
Impacts due to the equipment being dropped. Avoid dropping the bit on the ground as this can crack the segments.
Outil coincé dans le trou.
symptom Cause remedy
 
Debris is blocked between the core and the bit tube (steel, pieces of material); a steel bar has been drilled "banana shaped"; it has moved during drilling and jammed the bit (wedge effect). Disconnect the bit from the machine: use a spanner to turn the bit in both directions until it is released.
Loss of side-clearance of segments. Check the side-clearance of the segments. If the play is too little replace the tool.
Avantage:
POURQUOI NOUS CHOISIR?
1. Plus de 22 ans d'expérience dans les outils diamnd;
2. Obtenir de la connaissance de la demande du marché;
3. 12 professeurs et ingénieurs expérimentés;
4. Flux de production à haut rendement;
5. Système de contrôle de qualité stricte;
6. Exportés dans plus de 60 pays;
7. Équipe de vente professionnelle avec réponse rapide;

Contactez nous:
Quanzhou Sunny Superhard Tools Co., Ltd.
Ajouter: zone industrielle Tangxi, Luojiang, Quanzhou, Fujian, Chine
Code postal: 362010
TEL: 86 - 595 - 22003682
FAX: 86 - 595 - 22003987

Web: http://www.sunnytools.biz
Http://www.concretetoolsunny.com

Groupes de Produits : Outils de forage au diamant

Envoyer à ce fournisseur
  • *Sujet:
  • pour:

  • *Messages:
    Votre message doit comporter de 20 à 8000 caractères